Benches Apple TV

10

Apple TV does not show up in device list

apple Verified

Imported from the Apple Support Forums via the Wayback Machine 🔗

I've read all the post with the same subject but still can not get the Apple TV to show up in the device list of itunes.

I have multiple computers on a wired/wireless network, one is a windows XP laptop machine and it sees the Apple TV fine, can sync with itunes works great. This machine is connected via wireless connection. This machine does not have my music or photos that I want to sync so I want to sync the Apple TV with my desktop, I was just using the laptop as a diagnostic tool and to better understand the interaction between itunes and the Apple TV. I have tried all the steps given and still can not get the Apple TV to show up as a device on the desktop.

I originally had norton firewall on the desktop, uninstalled that so it would not be in the way, did not help. Windows firewall is not enabled.

I have sharing enabled in itunes and I have look for Apple TVs enabled. I have rebooted the router, Apple TV, computers etc. Reinstalled itunes.

I have a linksys wreless router in the system. I have tried connectnig the desktop via a wired connection as well as a wireless connection, no difference. The Apple TV can get on the wireless network fine, it can access the internet fine to play movie trailer etc. I have also connected it directly to the router via a cable, does not help. I tried connecting the desktop to the Apple TV directly with a crossed ethernet cable, did not work.

The desktop can ping the Apple TV.

I am assuming I do not have a problem with ports as the laptop sees the Apple TV fine?

Any suggestions or tips would be greatly appreciated

10 replies

Sign in or join Beachball Help to reply.

  1. 0

    Winston Churchill

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to the Apple Discussion Forums.

    To summarise and for clarity: You have set up your laptop itunes library and it works as it should with the tv, now you are trying to add your desktop and it doesn't see the tv.

    First point: the Laptop is your primary library, you can only have one primary library and if you wish to sync from the desktop you will need to make that your primary library instead of the laptop. You will need to turn of syncing for the laptop and register the desktop with the tv for syncing first and then the laptop as a secondary (streaming only) library. If you are trying to use your desktop without de-registering the laptop it will only ever be a secondary (streaming) library.

    You may have realised this and if so all well and good, but if not you might want to continue to establish your desktop as a secondary library and satisfy yourself that all is well before turning off your laptop and setting everything up again.

    On the assumption you are setting up the desktop as a secondary library at this time, how far have you got with registering the desktop, have you successfully entered the pass codes, did the tv show in the device list at any stage. As a secondary library itunes will only show the tv in it's device list when that itunes library is selected as the source library from the tv itself, could this be why you are unable to see it in the device list.

    User uploaded file

  2. 0

    TroyandCaren__

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Eventually I would like to have the desktop as my primary library and remove the laptop from the equation totally. I only have the laptop synced with the AppleTV now because after two days of playing with everything I turned on the laptop and it worked as expected.

    I can not register the AppleTV with the desktop because it has never shown up as a device.

    Additional info, The library on the desktop shows up at the laptop but the desktop never sees the library on the desktop. Also I have an additional desktop with itunes, its library also shows on the original laptop but does not show up on the desktop. I'm sure this is a clue, just not sure how to interpret it.

    I believe the problem is definitely on the desktop but I just can not figure out what it is. I also re-installed the network connection on the desktop to see if that may repair some type issue with the registry or issue with the TCP/IP protocol, no difference.

    I even tried connecting the desktop via a wireless connection the same as the laptop but it did not make a difference. If had the space I would just move everything onto the laptop and be done with it.

  3. 0

    Winston Churchill

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I can not register the AppleTV with the desktop because it has never shown up as a device.

    Forgive me if I'm not grasping the situation, but how far in registering the desktop have you got.

    (Are you aware you need to register each and every itunes library with the tv)

    1. select "connect to new itunes library" from the source menu on the tv

    2. Pass code appears on tv

    3. tv appears in the device list of all open itunes libraries on desktops

    4. Enter the pass code into the itunes you want to register (your desktop)

    5. itunes is now registered and it's library appears on the tv as another source.

    User uploaded file

  4. 0

    TroyandCaren__

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I understand that one must register the itunes library with the AppleTV.

    1) I have selected "connect to new itunes library"

    2) I see the pass code on the appleTV

    3) Does not happen, never has on the desktop

    4),5) Can't do these until stop 3 happens

    I am assuming it is some program or service running on the desktop that is keeping the two from seeing each other. Are you aware of any peticular items that may cause what I am seeing. The desktop is a media center PC, it originally had a program called HP tunes install that leveraged the itunes library, that was one of the first programs I uninstalled thinking it was capturing the traffic or keeping the traffic from reaching the desired endpoints.

  5. 0

    Winston Churchill

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Unfortunately there are quite a few thngs that could be blocking the tv.

    Early candidates to check would be your firewall and proxy server settings (no idea how to do this on a PC) you need ports 80, 443 and 3698 (TCP) and port 5353 (UDP) open, I know you have turned off the windows firewall and uninstalled Norton, but is there another way to check your ports (again, I know how to do this on a mac, no idea on a PC)

    You could also try disabling temporarily any antivirus software you have running.

    I agree your issue is likely a setting on your PC, if you set up another user temporarily you may be able to determine whether the issue is a user setting or a system wide setting.

    You do have itunes sharing checked in the itunes prefs I assume.

    User uploaded file

  6. 0

    dllamas

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    I´ve just solved this similar problem. After trying everything that you have just described I was feeling lost and tried the following: On the ATV I went to sources then I selected Start Syncronicing and at this moment the ATV was shown on the devices on iTunes (just loaded the 7.2.3 version) and it started to sinchronize all information.

    Of course that you have to make sure about your wireless connection, IP addressing squeme and all those technical requirements needed to create the LAN connection.

  7. 0

    Winston Churchill

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Welcome to the Apple Discussion Forums

    Mmmm, can't say I've come across this option before, anyone else notice if this is new or just something I've missed previously.

    User uploaded file

  8. 0

    moshe Keydar

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    Hi,

    I have the same problem:cannot see the AppleTV on the itunes in a Win desktop, when using the Ethernet cable. If helps, same issue with the Airport device: cannot see it on the Win desktop. Appreciate if Apple will find a solution for this , since there are many Win users that want to use the AppleTV.

    thanks, Moshe

  9. 0

    Rob the Elder

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    OK,

    I have two Atvs connected via Airport Extreme to a Win XP server. I had a lot of trouble dealing with connection and came up with a procedure that has worked every time for me.

    First, need to go to Atv and connect to the wireless network. Even if it says its connected, I select my Airport Extreme hub and tell it to connect.

    Then I tell it to select a source - want to add a new source for syncing. This is the page that gives you the unique code for syncing. All the above is on the Atv.

    I then go to my server and shut down ITUNES. I then force a reconnect or repair connection with Apple Extreme hub. Once its connected - I get 130 meg which is pretty good - I then restart ITUNES.

    In ITUNES properties make sure that the Apple TV tab has find Apple TVs selected.

    The Apple TV should show up in the devices list. Then its just a matter of selecting it in ITUNES and entering the code etc.

    When my ATV is in Apple TV mode - vice ITUNES library mode - it frequently looses visibility in ITUNES. If I select the ITUNES library as the source it generally comes back and is connected in ITUNES. If its been connected, and it is NOT in ITUNES, then I shut down ITUNES, repair the Apple Extreme link, restart ITUNES and both Atvs come back in the devices list. Works every time for me.

  10. 0

    Dr. Euphoria

    Imported from the Apple Support Forums via the Wayback Machine 🔗

    That is just too much time consuming work to fix this problem. I have the same problem, and having to reboot the Apple Extreme Base Station causes too many problems (i.e. having to re-enter the password into the ATV)... cant there be a better way to fix this, Apple????